User`s guide

114 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide — September 2007
Dialogic Corporation
Parameter Reference
• IP to PCM AGC Max Gain (DMG2000 Only)
• IP to PCM AGC Min Gain (DMG2000 Only)
• TDM to IP AGC Enable (DMG2000 Only)
• TDM to IP AGC Slew Rate (DMG2000 Only)
• TDM to IP AGC Target Level (DMG2000 Only)
• TDM to IP AGC Max Gain (DMG2000 Only)
• TDM to IP AGC Min Gain (DMG2000 Only)
T.38 Advanced Settings
• Allow T.38 ECM Faxes (DMG2000 Only)
• Transmit Small T4 ECM T.38 Packets (DMG2000 Only)
• Enable T.38 Spoofing (DMG2000 Only)
• TSI Removal (DMG2000 Only)
• CSI Removal (DMG2000 Only)
• NSF Removal (DMG2000 Only)
• DIS Removal (DMG2000 Only)
• T.38 Packet Loss Concealment Method (DMG2000 Only)
• T.38 UDPTL Redundancy Count for Fax Page Data (DMG2000 Only)
• T.38 UDPTL Redundancy Count for T.30 Messages (DMG2000 Only)
• Fax Transmit Level (dBm) (DMG2000 Only)
• Maximum UDPTL Packet Size (DMG2000 Only)
3.10.2 DSP Advanced Settings
3.10.2.1 TDM to IP Gain Adjustment (DMG1000 Only)
Description: Adjusts the gain of the audio signal in the Telephony-to-IP direction.
Allowed Values: -14 dB to +14 dB
Default Value = 0 dB
INI File Parameter Name = dspPbxToIPGain
3.10.2.2 IP to TDM Gain Adjustment (DMG1000 Only)
Description: Adjusts the gain of the audio signal in the IP-to-Telephony direction.
Allowed Values: -14 dB to +14 dB
Default Value = 0 dB