Technical data

Dialogic® Diva® SIPcontrol™ Software Configuration
Dialogic
®
Diva
®
SIPcontrol
TM
Software 1.8 Reference Guide page 44
System Settings
You may configure the parameters shown in the graphic and explained below:
Domain: Enter the domain name of the registrar server.
Own Display
Name:
Enter the name that should be displayed at the registrar server.
Protocol: Select UDP if you register as e-phone gateway.
Re-register Time: Enter the re-register time in seconds. This is the time the registration to the registrar server
remains valid. After this time has elapsed, the SIP stack service would need to re-register to
be available again. The default value is 3600 seconds.
Auth User Name: Enter a user name for authentication at the registrar server.
Password: Enter your password for authentication at the registrar server.
Register as: Leave the setting at the default value Standard. Select e-phone GW only if you use e-phone
and you want the Dialogic
®
Diva
®
SIPcontrol
TM
Software to function as gateway for e-phone.
Event Log Level: A computer with the Diva
SIPcontrol software installed may write different types of events into the
System Event Log. The details for each event log are described in Event
Logging on page 63.
Debug Level: The debug level setting may be used for debugging and tracing purposes. During normal operation,
it should be set to Off to lessen the effect on system performance.