Technical data

Dialogic® Diva® SIPcontrol™ Software Configuration
Dialogic
®
Diva
®
SIPcontrol
TM
Software 1.8 Reference Guide page 34
Authentication Configuration
You may configure the parameters shown in the graphic and explained below:
Routing Configuration
The routing configuration defines to which destination incoming calls are forwarded. Possible criteria that may
determine the destination are:
• called, calling, and redirected number or SIP address of a call for which the redirected number is only available
for calls originating in the PSTN,
• the source where a call originated, i.e., a PSTN interface name or a specific SIP peer,
• the current channel allocation across a set of several possible destinations in a load-balancing environment,
and
• the current status of a destination. See How Calls Are Processed
on page 45 for more information.
To add a routing, click the Add button. To change the settings for the enabled routing, click the Details button
on the right hand side. Since routes are processed in their configured order, the first matching route takes the
call. To change the order, click the "arrow up" and "arrow down" buttons. To open the online help for a specific
parameter, click the parameter and a window with the help text pops up.
For more information about possible routing configurations, see Routing examples
on page 47.
The following menus are available for configuration:
• Edit Routing Configuration on page 35
• Address Normalization For Condition Processing (Using Source Dialplan)
on page 35
• Conditions
on page 36
• Address Manipulation on page 36
Realm: A realm is a protection domain with its own user names and passwords. Enter the realm used by the
SIP peer for authentication. The realm entered here needs to be the same as the realm of the
endpoint.
Auth User Name: Enter a user name to be used with this realm.
Password: Enter the password to be used with this realm.