Technical data

Dialogic® Diva® Media Board Configuration
Dialogic
®
Diva
®
SIPcontrol
TM
Software 1.8 Reference Guide page 17
CHAPTER 4
Dialogic
®
Diva
®
Media Board Configuration
With Dialogic
®
Diva
®
SIPcontrol
TM
Software version 1.8, Dialogic
®
Diva
®
Media Boards can be configured via
the web interface. The configuration via the web interface can be accessed and updated remotely. The classic
configuration via the Dialogic
®
Diva
®
Configuration Manager is also available, but it can only be accessed from
the computer on which the Dialogic
®
Diva
®
System Release software is installed. Any changes will be reflected
in both configuration tools, meaning that if you change a parameter in the web interface, the change is
automatically done in the Diva Configuration Manager as well (and vice versa). The update of the configuration
between both tools will only take effect after you have saved the configuration, and, in case of the Diva
Configuration Manager, after you activated the configuration. For more information about activating the
configuration, see the Dialogic
®
Diva
®
Configuration Manager Online Help.
You can find information about the web interface in Dialogic® Diva® SIPcontrol™ Software Configuration on
page 24 and in Configuration Tips and Hints on page 25.
Dialogic
®
Diva
®
Media Board Configuration via the web interface
1. Click Start > Programs > Dialogic Diva > SIPcontrol Configuration.
2. In the Dialogic
®
Diva
®
SIPcontrol
TM
Software web interface, click Board configuration on the left hand
side. A menu displaying all installed Diva Media Boards will open: