Technical data

Software Installation
Dialogic
®
Diva
®
SIPcontrol
TM
Software 1.8 Reference Guide page 13
CHAPTER 2
Software Installation
To install the Dialogic
®
Diva
®
SIPcontrol
TM
Software, use the Dialogic
®
Diva
®
SIPcontrol
TM
Setup Wizard as
described below:
Note: If you want to upgrade from Diva SIPcontrol software version 1.5.1, DO NOT uninstall the software before
you install the Diva SIPcontrol software version 1.8, since if you uninstall the software you might lose some
settings, including your regular expressions.
1. Insert your Dialogic
®
Diva
®
Media Board into the computer as described in the installation guide that came
with your Diva board.
2. Install the Dialogic
®
Diva
®
System Release 8.5.2 software as described in the Dialogic
®
Diva
®
System
Release Reference Guide. The Reference Guide is available on the Dialogic web site under:
www.dialogic.com/manuals
.
Note: If the correct version of the Diva software (8.5.2 or higher) is not detected during the installation,
an error message is displayed and the installation is aborted.
3. Go to the directory in which the Windows
®
installer package "DSSIPControl.msi" is located and double-click it.
4. In the welcome dialog box, click Next.
5. The End-User License Agreement box appears. Accept the license agreement to start the installation.
6. If you are upgrading from a former version of the Diva SIPcontrol software and you kept the configuration
files, the Existing configuration found box appears. Select whether you want to reuse the existing
configuration files and click Next.
7. The Ready to Install the Program box appears. Click Install to install the Diva SIPcontrol software.
8. If the installation terminates prematurely, verify that:
• the installed Diva Media Board is supported; see Supported hardware
on page 12 for more information,
• the correct Diva System Release software is installed; see Supported software
on page 12 for more
information,
• the operating system is supported by the Diva SIPcontrol software; see Supported operating systems on
page 12 for more information,
• the CAPI driver is installed correctly, inserted in the Dialogic
®
Diva
®
Configuration Manager of the Diva
System Release software, and connected to the Diva Media Board.
If the installation still cannot be completed, contact Dialogic Customer Support personnel under
www.dialogic.com/support
.
9. After the installation is complete, the Completing the Diva SIPcontrol Wizard box appears.
Click Finish to exit the installation.
10. Now, you can configure the settings. To do so, click Start > Programs > Dialogic Diva > SIPcontrol
Configuration. If you need help during the configuration, click the parameter to display its online help text.