Installation manual

GFI FaxMaker
1 Installing fax devices |7
Screenshot 3: Add New Hardware wizard: Search and install options dialog
8. Go to Control Panel > Add New Hardware. Select Include this location in the search and provide the path where
you have installed the Brooktrout TR1034 drivers. If you have opted to install the drivers in the default path, you should
find these drivers in the same path where GFI FaxMaker is installed; else you should specify the same location that you
have used in step 6 of this installation.
Screenshot 4: Confirm installation of unsigned drivers
9. Confirm the installation of uncertified drivers. Click Yes to proceed and install the new hardware.
10. Go to Start > All Programs > GFI FaxMaker Brooktrout TR1034 Drivers > Brooktrout Configuration Tool.