Installation manual
GFI FaxMaker
1 Installing fax devices |18
Screenshot 15: Define VoIP gateway properties
5. Depending on the VoIP gateway selected, provide the properties of the VoIP gateway. Typically this consists of the IP
address of the VoIP gateway and any authentication settings required by your VoIP gateway. Click Next to continue
setup.
6. Provide a meaningful description of the newly created controller and decide how many channels should be available
for GFI FaxMaker.
7. Click Next and Finish to finalize settings.
8. From the GFI FaxMaker Configuration Wizard, click Configure lines to configure fax lines. For more information on
how to configure GFI FaxMaker fax lines, go to:
http://support.gfi.com/manuals/en/fax2014/default_csh.htm#1011.
9. Finalize the GFI FaxMakerConfiguration Wizard.
NOTE
The GFI FaxMaker machine may require a reboot if any files were locked (in use) during installation.
1.9.3 Adding XCAPIfax lines in GFI FaxMaker
To add XCAPIlines in GFI FaxMaker:
1. Click Add... in the Lines/Devices properties dialog.
2. Choose any available fax line and in Device type, select ISDN PRI / IP CAPI 2.0 devices.
3. Select a Physical line/port and click OK.
4. In the Device tab, under ISDN type, choose TE-SYSTEMS XCAPI.
5. Configure other line options. For more information on how to configure GFI FaxMaker fax lines, go to:
http://support.gfi.com/manuals/en/fax2014/default_csh.htm#1011