Installation manual

GFI FaxMaker
1 Installing fax devices |17
1. Open the XCAPI Configuration and from the Controller section select Clickhere to add a controllerlink.
2. From the Controller Wizard select Add Voice-over-IP controller(VoIP) and click Next.
Screenshot 14: Add a new controller
3. Select the Network Card that XCAPI will use to communicate with your VoIP Gateway.
4. Select the VoIP gateway that will be used to send and receive faxes. If the list included in XCAPI does not contain your
PBX, select a compatible or one of the generic environments such as ‘H.323 Gateway’ or ‘SIP’.
NOTE
For more information refer to the XCAPI Interoperability list available from:
http://go.gfi.com/?pageid=FM_XCAPIInteroperabilityList