Installation manual
GFI FaxMaker
1 Installing fax devices |15
provider. These systems then communicate with the public switched telephone network (PSTN) to transmit or receive
fax calls.
GFI FaxMaker supports the following FoIPsolutions:
FoIP solution Description
TE-SYSTEMS XCAPI XCAPI is a software-only Fax over IP (FoIP) solution from TE-SYSTEMS. The XCAPIinstaller is pre-
packaged with GFI FaxMaker and no additional downloads are required.
For more information, refer to Installing XCAPI FoIP (page 15).
Dialogic Brooktrout SR140 The Brooktrout SR140 is a software-only Fax over IP (FoIP) solution from Dialogic Technology. The
Dialogic Brooktrout SR140installer is pre-packaged with GFI FaxMaker and no additional downloads
are required.
For more information, refer to Installing the Brooktrout SR140 (FoIP) (page 19).
Dialogic (Eicon) Diva Server
SoftIP
Dialogic Diva Server SoftIP for SIPis a software application from Dialogic Technology for IPtelephony
environments.
To use this software with GFI FaxMaker, install and configure Dialogic Diva Server SoftIP.
After configuration add ISDN PRI CAPI 2.0 lines in GFI FaxMaker. For more information on how to
configure GFI FaxMaker fax lines, go to: http://support.gfi.com/manuals/en/fax2014/default_
csh.htm#1011
Dialogic Brooktrout TR1034
models with the built-in net
work card for FoIP
Use a Dialogic Brooktrout TR1034 device that includes a built-in network card for FoIP. Install the Dia
logic Brooktrout TR1034 drivers that are included with GFI FaxMaker and use the Brooktrout Con
figuration Tool to configure IP call settings.
1.9 Installing XCAPI FoIP
XCAPI is a software-only Fax over IP (FoIP) solution from TE-SYSTEMS. This topic explains how to install XCAPI on your GFI
FaxMaker server.
1.9.1 Installing XCAPI
Install XCAPI during the GFI FaxMaker Configuration Wizard, either after installation, or by launching it manually from
Start > GFI FaxMaker > FaxMaker Configuration Wizard.
1. In the Welcome page of the GFI FaxMaker Configuration Wizard click Next to continue.
NOTE
Some GFI FaxMaker services may be restarted when running the configuration wizard.