Technical data

Software Installation
Dialogic
®
Diva
®
System Release 8.5.6WIN Reference Guide page 23
CHAPTER 2
Software Installation
This chapter describes the hardware and software requirements for installing the Dialogic
®
Diva
®
System Release
software, it also describes how to download the installation files and how to install the Diva System Release
software.
Requirements for Dialogic
®
Diva
®
System Release software installation
For the installation of the Diva System Release software, the following requirements have to be met:
• PC/AT-compatible computer (at least 500 MHz or higher processor with at least 500 MB RAM)
•Windows
®
XP, Windows Server
®
2003, Windows Vista
®
, or Windows Server
®
2008 operating system
• At least 15 MB free space on the drive on which the operating system is installed
• An installed Dialogic
®
Diva
®
Media Board
Dialogic
®
Diva
®
V-PRI Media Boards with multiple ports
• At least 1.5 GHz or higher processor
• At least 512 MB RAM (if more than one board is installed the capacity needs to be at least 1 GB)
• Power supply with 450 W (6 A with 3.3 V per Diva multiport PRI Media Board)
Note: Depending on the computer, a stronger power supply may need to be used.
To install your Dialogic
®
Diva
®
Media Board in your computer, refer to the printed installation guide that came
with your Diva Media Board or that you downloaded from the Dialogic web site.
Requirements for Dialogic
®
Diva
®
softIP Software installation
For the installation of the Diva softIP software, the following requirements have to be met:
•Windows
®
XP 32-bit version (with Service Pack 2 or higher), Windows Server
®
2003 32-bit version (with
Service Pack 1 or higher), Windows Vista
®
32-bit version (with Service Pack 1 or higher) operating system
• System requirements recommended from Microsoft for the respective operating system
• Computer with USB interface for USB dongle
• An installed NDIS 5 compatible network controller
Notes:
• For Windows
®
XP, you have to deactivate your firewall.
• The Diva softIP software cannot be installed on a Terminal Server.
To download the installation files
1. Open the following web site
http://www.dialogic.com/products/tdm_boards/system_release_software/default.htm.
2. In the Diva Software Drivers table, click Diva SR Software for Windows.
3. Under Related Links, select Download Diva SR software for Windows.
4. Follow the instructions on the web and copy the installation files to your hard disk and do not change the
directory structure of the extracted files.