Technical data

Features
Dialogic
®
Diva
®
System Release 8.5.6WIN Reference Guide page 11
TDM fax support, e.g., for typical Unified Messaging (UM) applications, up to V.17 (14.400 bps
and lower bit rates)
Note: At most, half of the available channels can be licensed for these fax features.
• Support for Fax G3, T.30, V.17, V.29, V.27ter, V.21
• Fax Compression MH, MR, MMR
• Error Correction Mode ECM
• Fax Polling
• Reversal Fax Direction
• Fax Password, Sub Addressing, "new header line"
• Page Formats A4, B4, A3
• Resolutions fine, super fine, ultra fine
• Color Fax JPEG format
• T.38 FoIP (PSTN - IP Gateway mode)
Data modem support, up to V.90
• All modem modulations POS up to V.90 (client and server side)
• V.21, V.23, V.22, V.22bis, Bell 103, Bell 212A, V.32, V.32bis, V.34, V.90, including error correction MNP,
V.42, SDLC and compressions V.42bis, MNP 5
• POS modulations V.22 FC, V.22bis FC, V.29 FC
• Text telephone modem: V.18, V.21, Bell 103, V.23, EDT, Baudot 45, Baudot 47, Baudot 50, DTMF
• Extended modulations V.23 half duplex, V.23 on hook (SMSC mode), V.23 off hook, Bell 202 (POS), Telenot
• With V.90, up to 20 channels per E1 or T1 line are possible. All other modem emulations offer the full
amount of channels.
License-free features
General features
• Using the Dialogic
®
Diva
®
Media Boards as DSP Resource Board with
• the Dialogic
®
Diva
®
softIP Software (see page 18 for more information)
• CAPI and Diva SDK-based applications
Diva Media Boards with DSPs, except Dialogic
®
Diva
®
PRI/E1/T1-8 PCI Media Boards, can be used as
conventional TDM boards and/or as DSP Resource Boards for third party application scenarios that require
DSPs, such as clear channel fax or clear channel modem but also for VoIP codecs for transcoding. The
latter can be implemented by a CAPI or Dialogic
®
Diva
®
SDK application via so-called NULL PLCIs. Please
contact Dialogic Customer Support for more information.
• Interoperability with the Dialogic
®
Brooktrout
®
Bfv API SDK: The Dialogic
®
Brooktrout
®
SR140 Fax Software
version 5.2.1 has been tested to be V.34/T.38 interoperable with the Dialogic
®
Diva
®
SIPcontrol
TM
Software.
The Brooktrout SR140 Fax Software is high-performance, host-based T.38 fax software for IP networks.
• Support for 64-bit version of all supported operating systems
Notes:
• The 64-bit version of the Diva System Release software supports RAS, CAPI, TAPI (without Dialogic
®
Wave
driver), Port driver, and SNMP service.
• The Dialogic
®
Diva
®
softIP for SIP software is only supported on 32-bit operating systems.
• Support for the ISDN basic rate interface (BRI), the ISDN primary rate interface (PRI), the channelized E1
interface, and the channelized T1 interface
• Support for fractional PRI, E1, and T1 lines
• Support for multiple PRI, E1, and T1 lines