User guide
FAX BOARDS AND FAX DRIVERS INSTALLATION
94
For all these preliminary steps, refer to Dialogic documentation and technical support. Then, you are ready to install
the fax server following the installation procedure explained in VSI-FAX Pre-Installation in the Installation and
Administration documentation.
Diva Server drivers installation for UNIX/Linux
To install and configure Diva Server board drivers on UNIX/Linux:
1. Download the Dialogic® Diva® System Release for Linux package from the Dialogic Web site:
http://www.dialogic.com/products/tdm_boards/system_release_software/Diva_for_Linux.htm
.
2. Follow the installation instructions from the readme.txt file.
3. Install the VSI-FAX Server.
During the installation process you will be prompted to configure a modem, click No.
You will then be prompted to configure your Diva Server boards. Click Yes. Complete the installation.
See also
For information about installing VSI-FAX server, refer to VSI-FAX Pre-Installation in the Installation and
Administration documentation.
Troubleshooting
If lines don't come up and remain in a Not running state using vfxstat, you have to create them manually using the
following commands:
vfxadmin device -a -i ei -v $ChannelName -n "Eicon $ChannelName" $ChannelName.
Where $ChannelName has the following form: chCLL
C: Controller Number using 1 digit
LL: Line Number using 2 digits
Example:
For Diva Server 4BRI board:
vfxadmin device -a -i ei -v ch101 -n "Diva ch101" ch101
vfxadmin device -a -i ei -v ch102 -n "Diva ch102" ch102
vfxadmin device -a -i ei -v ch201 -n "Diva ch201" ch201
vfxadmin device -a -i ei -v ch202 -n "Diva ch202" ch202
For Diva Server PRI/E1 -30 board:
vfxadmin device -a -i ei -v ch101 -n "Diva ch101" ch101
vfxadmin device -a -i ei -v ch102 -n "Diva ch102" ch102
....
vfxadmin device -a -i ei -v ch129 -n "Diva ch129" ch129
vfxadmin device -a -i ei -v ch130 -n "Diva ch130" ch130
For Diva Server Analog 8P board:
vfxadmin device -a -i ei -v ch101 -n "Diva ch101" ch101
vfxadmin device -a -i ei -v ch102 -n "Diva ch102" ch102
vfxadmin device -a -i ei -v ch103 -n "Diva ch103" ch103
vfxadmin device -a -i ei -v ch104 -n "Diva ch104" ch104
vfxadmin device -a -i ei -v ch105 -n "Diva ch105" ch105
vfxadmin device -a -i ei -v ch106 -n "Diva ch106" ch106
vfxadmin device -a -i ei -v ch107 -n "Diva ch107" ch107
vfxadmin device -a -i ei -v ch108 -n "Diva ch108" ch108