User guide

FAX BOARDS AND FAX DRIVERS INSTALLATION

Configuration

Parameters for E1 R2

CAS Ports

Default value: 120

max_did_digits

Specifies a value that defines the maximum number of DID digits to wait for before

accepting an incoming call. Valid values are:

0 = Disables waiting for DID digits

1 - 63 = Specifies the number of digits to expect before accepting an incoming

call

Range: 0 through 63

Default value: 0

protocol_file

Specifies the full path and name of the file containing the configuration for the R2 variant

of a channel associated signaling (CAS) protocol. This parameter dictates which R2 CAS

protocol runs on the port. Valid values are:

itu_argentina.r2=Selects the protocol file for Argentina

itu_brazil.r2 = Selects the protocol file for Brazil

itu_china.r2 = Selects the protocol file for China

itu_egypt.r2 = Selects the protocol file for Egypt

itu_korea.r2 = Selects the protocol file for Korea

itu_mexico.r2 = Selects the protocol file for Mexico

Unit: character string

Range: 1 - 256 (_MAX_PATH)

Default value: None

Configuration Parameters

for T1 ISDN Ports

call_type

Specifies the call type to use when making the outbound call. Use one of the following

values for this field:

AUTO = Makes a call using the modem type and then automatically retries the

call using the voice type if the other end cannot accept modem calls.

MODEM = Makes a modem (3.1 kHz audio) call. This setting provides higher

quality audio for the call.

SPEECH = Makes a voice call.

Default value: AUTO

default_caller_id

Specifies a string of up to 15 characters that provides the caller ID to use when placing

outbound calls. If the user application provides a caller ID when placing a call, the

system ignores this field.

Unit: character string

Range: 1 - 15 (_ECC_MAX_ANI_LENGTH)

Default value: Blank