User guide

BROOKTROUT CONFIGURATION FILES

Configuration Parameters

for BRI Ports

multipoint circuit. Valid values are:

AUTO = Automatically detects the datalink setting

POINT2POINT = Configures for a point-to-point circuit

POINT2MULTIPOINT = Configures for a point-to-multipoint circuit

Default value: AUTO

default_caller_id_channel_0

default_caller_id_channel_1

Specifies a string of up to 15 characters that provides the caller ID to use

when placing outbound calls on channel 0 ( or 1). If the user application

provides a caller ID when placing a call, the system ignores this field.

Unit: character string

Range: 1 - 15 (_ECC_MAX_ANI_LENGTH)

Default value: Blank

did_offset

Specifies a value that defines the number of digits to remove from the beginning of

the string of DID digits received from the network. Valid values are:

0 = Does not remove any DID digits

1 - 63 = Specifies the number of digits to remove

Range: 0 through 63

Default value: 0

did_timeout

Specifies a value that defines the maximum timeout allowed before processing the

call after assuming receipt of the last DID digit. Valid values are:

0 = Indicates no waiting time

1 - 20 = Specifies the number of seconds to allow after receiving the last DID

digit before processing the call

Unit: second

Range: 0 through 20

Default value: 10 (used when the API does not find another value for this parameter)

disable_conn_ack

Specifies a Boolean value that determines whether the system sends a connection

acknowledgment after receiving a connect message from the network. Set the

parameter as follows:

FALSE = The system sends a connection acknowledgment message after

receiving a connect message from the network.

TRUE = The system does not send a connection acknowledgment message

after receiving a connect message from the network.

Default value: FALSE

emulation

Defines whether to configure the trunk for Central Office (CO) or Customer Premise

Equipment (CPE) protocol emulation. For testing purposes only. Valid values include:

CO = Emulates the CO protocol

CPE = Emulates the CPE protocol