User guide

BROOKTROUT CONFIGURATION FILES
53
Keyword Description
subpwdsep
Enables reception of the SUB, PWD, and SEP FSK signals. Applications typically use these
signals to direct or validate incoming calls.
Value Type
hex
Default value
0
teleph
The name of the telephony configuration file, which contains telephony hardware configuration
information and static telephony connection information. If the file specified by the teleph
keyword is present, then the file specified by the digital keyword will not be used. If not, then the
digital keyword file will also be checked for.
Value Type
character string
Default value
callctrl.cfg
tone/pulse
TruFax only. Selects the default dialing type.
Value Type
string
Default value
tone
v_play_gain
Specifies the initial gain value for speech playback. A positive value indicates a step up; a
negative value indicates a step down. The gain steps are the same as those controlled by
BfvSpeechModify. Range: -1 to 3 for TR1034.
Value Type
decimal
Default value
0
v_timeout
CALL_PROTOCOL_VOICE mode only. The maximum time (in seconds) to wait after the last
dialed digit for a final call progress result. This applies to the use of BfvLineOriginateCall and
BfvLineOrigCallDB only.
Value Type
decimal
Default value
60 seconds
v34_ci_enable
Enables (1) or disables (0) the ability to detect and send CI in order to enter V.8 mode and V.34