User guide

INSTALLING BROOKTROUT DRIVERS ON UNIX/LINUX
41
Can the setup run the above commands ? (y/n) [y] : y
If you answer no, the installation will abort after displaying the following message:
Can the setup run the above commands ? (y/n) [y] : n
The setup will abort because the listed libraries have not text relocation
attributes.
8. When the Brooktrout Boston Driver has been installed on your machine, the list of available boards appears:
Select the Dialogic Brooktrout board or SR140 Fax Software to configure:
1) TR1034 - T1 - 24 channels
2) TR1034 - T1 - 16 channels
3) TR1034 - T1 - 8 channels
4) TR1034 - T1 - 4 channels
5) TR1034 - E1 - 30 channels
6) TR1034 - E1 - 20 channels
7) TR1034 - E1 - 16 channels
8) TR1034 - E1 - 10 channels
9) TR1034 - E1 - 8 channels
10) TR1034 - E1 - 4 channels
11) TR1034 - Analog - 8 channels
12) TR1034 - Analog - 4 channels
13) TR1034 - Analog - 2 channels
14) TruFax - Analog - 2 channels
15) TruFax - Analog - 1 channel
16) TR1034 - BRI - 4 channels
17) TR1034 - BRI - 2 channels
18) TruFax - BRI - 4 channels
19) TruFax - BRI - 2 channels
20) SR140 - IP - The number of channels depends on the license
q) Quit
Enter 20 to install the Brooktrout drivers for SR140 Fax Software.
9. The installation program runs the /usr/sys/boston/listnodeid tool to retrieve the NodeId of your
computer and displays this NodeId:
Did you already generate SR140 Fax Software license for this computer with
NodeId:
Is this OK? (y/n) [y] :
10. Copy the NodeId retrieved by the installation program to the clipboard. You will use this number to obtain
your SR140 Fax Software license.
11. Leave the installation program terminal opened if you can and turn to the next step that consists in obtaining
an SR140 Fax Software license file. If you already own an SR140 license file for the NodeID retrieved by the
installation program, skip the next step and go directly to Step 3: Complete the Brooktrout drivers installation
.
OR if you cannot leave the installation program terminal opened while you are generating your SR140 Fax
Software license, answer no. You will relaunch the drivers installation ($VSIFAX/lbin/vsi-boston-
config.sh) and answer yes to the above question when you have your license file.
Note
You can launch the /usr/sys/boston/listnodeid tool separately from the Brooktrout drivers installation.
You may launch it after installation if you change your machine.
Step 2: Obtain an SR140 Fax Software license
You can obtain an SR140 Fax Software license from the Dialogic website using the NodeID retrieved by the
Brooktrout drivers installation program that comes with VSI-FAX. The procedure is described in Activating a License
Using the Web in the SR140 Linux User Guide.pdf documentation file, produced by Dialogic and delivered with VSI-
FAX:
You can download this Dialogic file from VSI-FAX documentation website: http://doc.esker.com/vsi61. Go to
Other formats.