User guide

INSTALLING BROOKTROUT DRIVERS ON UNIX/LINUX
37
3. Enter the name of the directory to extract the drivers install files into. This directory must have at least 60 MB
free. (The default location is /tmp)
4. Check the installation path. (The default location is /usr/vsifax).
5. Answer yes when prompted to shut down running VSI-FAX servers.
6. If you were using a Brooktrout board with a former version of VSI-FAX, we recommend that you answer no
when prompted whether you want to keep the existing configuration. This way you will benefit from the new
version's enhancements when re-configuring your board.
7. Services are shut down and VSI-FAX Brooktrout TR1034-SR140 drivers are installed:
Installing VSI-FAX Brooktrout TR1034-SR140 drivers
............................................
Installing the Boston driver
Installing Brooktrout Boston Device Driver Version 6.0.0
Configuring Boston driver:
Max PCI hw modules 16
Phys buf size 32768
App buf size 10240
Machine ID 1
History disabled
The Brooktrout Boston Driver has been installed on your system.
Dialogic only supports official kernel patches as released by Red Hat. If you are installing VSI-FAX on a
kernel version that Dialogic does not support, the VSI-FAX Brooktrout TR1034-SR140 drivers cannot be
installed and you are prompted to recompile the driver:
Installing VSI-FAX Brooktrout TR1034-SR140 drivers
............................................
Installing the Boston driver...
Installing Brooktrout Boston Device Driver Version 6.0.0
Previously installed driver being removed.
Removing previously installed driver...
Configuring Boston driver:
Max PCI hw modules 16
Phys buf size 32768
App buf size 10240
Machine ID 1
History disabled
Support for current kernel version 2.6.18-92.el5 not found.
Sorry, but the Brooktrout installation script must abort.
By default, the support for your current kernel version is not included. You
need to recompile the driver so it can operate with the kernel currently
running on your system.
Please follow the instructions provided in the topic 'Recompiling on Linux
Platforms' in the Fax Boards and Fax Drivers Installation guide. The source
files that will let you recompile the driver have been installed
under /usr/sys/boston/kernel. Once the driver has been successfully
recompiled, please resume the setup procedure by relaunching
/usr/vsifax/lbin/vsi-boston-config.sh
Installation aborted.
If you are in this case, follow the steps described in Recompiling on Linux platforms
(page 43) and resume the
setup procedure by relaunching $VSIFAX/lbin/vsi-boston-config.sh.
8. When runnning the installation on Red Hat Enterprise Linux ES/AS 5.0, you are prompted to allow the
installation program to execute certain commands in order to grant required permissions to the Brooktrout
libraries:
SELinux is enabled and set to 'Enforcing' on this server. It will
prevent bostlib_mt.so and other Dialogic-supplied shared libraries
from loading because they require text relocation, which is very
common for third-party shared libraries.