User guide
FAX BOARDS AND FAX DRIVERS INSTALLATION
34
6. IMPORTANT: Click the Apply button ( ) in the toolbar to apply your configuration. You can see a
progress bar during configuration update.
7. Once your configuration has been applied, select File > Exit to quit the Brooktrout Configuration Tool.
8. A summary screen displays. Click Next to complete.
9. If you have launched the Brooktrout TR1034-SR140 drivers installation from VSI-FAX Server's main setup,
you are asked whether to start the VSI-FAX Server.
10. Click Yes to start VSI-FAX Server.
11. Click Finish on the final summary screen to complete.
Notes
To reference each available channel, VSI-FAX uses Brooktrout logical numbering: number of the SR140 module
(e.g. 65) followed by -2, -3, -4, etc. depending on the number of work channels available on this SR140 module).
Consider the example below:
vfxadmin device -l
Name Description FIM ena snd rcv Device
------------ -------------------- ---- --- --- --- --------------
ch00 SR140 mod 65 ch 2 bm yes yes yes ch65-2 (master)
ch01 SR140 mod 65 ch 3 bm yes yes yes ch65-3 (slave of ch00)
ch02 SR140 mod 65 ch 4 bm yes yes yes ch65-4 (slave of ch00)
ch03 SR140 mod 65 ch 5 bm yes yes yes ch65-5 (slave of ch00)
ch04 SR140 mod 65 ch 6 bm yes yes yes ch65-6 (slave of ch00)
ch05 SR140 mod 65 ch 7 bm yes yes yes ch65-7 (slave of ch00)
ch06 SR140 mod 65 ch 8 bm yes yes yes ch65-8 (slave of ch00)
ch07 SR140 mod 65 ch 9 bm yes yes yes ch65-9 (slave of ch00)
ch08 SR140 mod 65 ch 10 bm yes yes yes ch65-10 (slave of ch00)
ch09 SR140 mod 65 ch 11 bm yes yes yes ch65-11 (slave of ch00)
ch10 SR140 mod 65 ch 12 bm yes yes yes ch65-12 (slave of ch00)
ch11 SR140 mod 65 ch 13 bm yes yes yes ch65-13 (slave of ch00)
After the installation, you can modify your SR140 Fax Software configuration by launching the Brooktrout
Configuration Tool. For this, run the configtool.exe program located in the %ProgramFiles%\Brooktrout\bin
directory. If you need to add a physical board, run vsi-boston-config.exe under \VSI-FAX\FaxServer\lbin\ in
the installation directory.
Troubleshooting
If you experience problems with SR140 on a Windows Server 2008 platform, check the firewall rules and ensure
that these rules allow the communication with the SIP or H323 protocol.