User guide

INSTALLING BROOKTROUT DRIVERS ON WINDOWS
29
10. Click Yes to start VSI-FAX Server.
11. Click Finish on the final summary screen to complete.
Note
After the installation, you can modify your board configuration by launching the Brooktrout Configuration Tool. For
this, run the configtool.exe program located in the %ProgramFiles%\Brooktrout\bin directory. If you need to
change boards or add a new one, run vsi-boston-config.exe under \VSI-FAX\FaxServer\lbin\ in the
installation directory.
SR140 configuration on Windows
After the steps described in Configuring the Brooktrout driver for TR1034, TruFax boards or SR140 (page 18),
continue with the steps below if you want to set up SR140 Fax Software solution for Fax over IP.
1. In Brooktrout Configuration Tool, click on the BTCall Parameters (All boards) node in the tree view to
configure BTCall Parameters as shown below.
• Check that the Country Telephony Parameter File field is set to
%ProgramFiles%\brooktrout\config\BT_CPARM.cfg.
• Set the Country field to your country (if you reside in a European country, select European
Community)