User guide

FAX BOARDS AND FAX DRIVERS INSTALLATION

Then expand the IP Call Control Modules node in the tree view, and select SIP. In the right pane, open the IP

Parameters tab, and enter the default gateway as shown below:

6. IMPORTANT: Click the Apply button ( ) in the toolbar to apply your configuration. This ensures that the

Brooktrout board is correctly installed. You can see a progress bar during configuration update.

7. Once your configuration has been applied, select File > Exit to quit the Brooktrout Configuration Tool.

8. A summary screen displays. Click Next to complete.

9. If you have launched the Brooktrout TR1034, SR140 drivers installation from VSI-FAX Server's main setup,

you are asked whether to start the VSI-FAX Server.