User guide

FAX BOARDS AND FAX DRIVERS INSTALLATION
26
3. Expand the Call Control Parameters node in the tree view, click the fax board item (e.g. Module 0x2:
TR1034...) On the Global Settings tab in the Call Control Type field, select IP to configure Fax over IP (be it
with H323 and/or SIP stack).
4. (if you selected H323 in the IP Stack dialog box) To configure the Brooktrout H323 stack to run on the board,
expand the Call Control Parameters node in the tree view, click the fax board item (e.g. Module 0x2:
TR1034...), open the Ethernet/IP Port tab in the right pane, select H.323 in the IP Call Control Module combo
box, and enter the IP Address of the TR1034 board as shown below: