User guide

INSTALLING BROOKTROUT DRIVERS ON WINDOWS
25
change boards or add a new one, run vsi-boston-config.exe under \VSI-FAX\FaxServer\lbin\ in the
installation directory.
Fax board with Fax over IP configuration
After the steps described in Configuring the Brooktrout driver for TR1034, TruFax boards or SR140 (page 18),
continue with the steps below if you own a fax board with which you perform both PSTN physical faxing and Fax over
IP.
1. The Configure IP Stack dialog box appears when the Brooktrout Configuration Tool is launched. Select SIP or
H323 depending on which Brooktrout stack you want to run on this board and click OK.
2. The Brooktrout Configuration Tool is launched to allow you to configure your board. Click on the BTCall
Parameters (All boards) node in the tree view to configure BTCall Parameters.
• Check that the Country Telephony Parameter File field is set to
%ProgramFiles%\brooktrout\config\BT_CPARM.cfg.
• Set the Country field to your country (if you reside in a European country, select European
Community)