User guide

FAX BOARDS AND FAX DRIVERS INSTALLATION

3. Expand the Call Control Parameters node in the tree view, click the fax board item (e.g. Module 0x2:

TR1034...) On the Global Settings tab in the Call Control Type field, select PSTN not to use Fax over IP even

if available.

You should not have to change the port or anything. The next step is to apply your configuration and quit

Brooktrout Configuration Tool.

4. IMPORTANT: Click the Apply button ( ) in the toolbar to apply your configuration. This ensures that the

Brooktrout board is correctly installed. You can see a progress bar during the configuration update.

5. Once your configuration has been applied, select File > Exit to quit the Brooktrout Configuration Tool.

You see a summary status screen. Click Next to complete.

6. If you have launched the Brooktrout TR1034, SR140 drivers installation from VSI-FAX Server's main setup,

you are asked whether to start the VSI-FAX Server.

7. Click Yes to start VSI-FAX Server.

8. Click Finish on the final summary screen to complete.

Note

After the installation, you can modify your board configuration by launching the Brooktrout Configuration Tool. For

this, run the configtool.exe program located in the %ProgramFiles%\Brooktrout\bin directory. If you need to