User guide

FAX BOARDS AND FAX DRIVERS INSTALLATION
10
Installing the Plug and Play driver for
TR1034, TruFax boards
The Brooktrout TR1034, TruFax boards come with a plug and play (PnP) driver. Follow the explanations below to
install or update this driver depending on your situation.
In case of fresh installation...
If you do not have any Brooktrout board physically installed in your server:
1. Stop your server.
2. Install your board.
3. Switch on your server.
4. Be sure that all switch settings on the fax boards are correct and the boards are physically installed in the
machine.
5. When the system is coming up after the fax board installation, wait for the Plug and Play service to detect the
installed board. The Found New Hardware wizard is displayed. Follow the steps described in Plug and Play
driver installation on Windows Server 2003 or Plug and Play driver installation on Windows Server 2008
depending on your platform’s operating system.
In case of upgrading...
If you are upgrading a server that already includes a Dialogic
®
Brooktrout
®
TR1034 or TruFax board installation with a
Plug and Play driver, you need to update the Plug and Play driver with the driver package included in the new
version before launching the upgrade of the server.
If you launch the server upgrade before upgrading the Plug and Play driver, you will get the following message: