User`s guide

98 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
Allowed Values: IP address in dotted decimal notation
Default Value = (no default value)
INI File Parameter Name = gwFaxServerAddress
Fax Server Network Group
Description: Defines the Network Group to be used for inbound TDM fax calls when Fax Server
Address is non-null.
Allowed Values: Any string with length between 0 - 63 characters
Default Value = (no default value)
INI File Parameter Name = gwFaxServerNetworkGroup
Fax/Modem Tone Relay Mode
Description: Selects the Realtime Transfer Protocol (RTP) method by which fax and modem tones
are transported between the TDM network and VoIP network.
Allowed Values:
• RFC2833 = Fax and modem tones from the TDM network are sent as RFC2833 packets to the
VoIP network. RFC2833 packets from the VoIP network are rendered to TDM.
• Inband-Tone = Fax and modem tones from the TDM network are passed through VoIP.
Inband-Tone is only reliable when the Preferred Code parameter is set to G.711 only.
Default Value = RFC2833
INI File Parameter Name = dspFaxModemToneRelay
Enable V.34 Fax
Description: The gateway supports V.17 and V.34 fax modems.
Note: The V.34 fax modem setting is currently only supported on the DMG2030DTIQ and
DMG2060DTISQV34.
Allowed Values:
• Yes = The gateway will use V.34 fax modem.
• No = The gateway will not use V.34 fax modem but instead will use V.17 fax modem.
Default Value = No
INI File Parameter Name = gwV34Enable