User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 97
Parameter Reference
Unhold on RE-INVITE with No SDP
Description: If set to No and the call is on hold, when receiving a RE-INVITE with no SDP, the
hold is not removed. If set to Yes and the call is on hold, when receiving a RE-INVITE with no
SDP, the hold is removed.
Allowed Values:
• Yes
• No
Default Value = No
INI File Parameter Name = sipReInviteNoSdpIsUnhold
3.5.3 Fax Group
The Fax subgroup includes the following parameters:
• Fax-IP Transport Mode
• Fax Server Address
• Fax Server Network Group
• Fax/Modem Tone Relay Mode
• Enable V.34 Fax
• V.34 Fax Speed Limit
Fax-IP Transport Mode
Description: Defines the method used by the Media Gateway to transport fax calls over IP.
Allowed Values:
• None = No special processing is performed for transporting fax.
• T.38 = T.38 fax protocol is used.
• G.711- Passthrough = Media Gateway will automatically switch the IP media stream to G.711
Passthrough.
Default Value = T.38
INI File Parameter Name = gwFaxTransportMode
Fax Server Address
Description: Defines the IP address to which all inbound TDM fax calls will be directed when
non-null.