User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 69
Parameter Reference
3.3.6 Monitoring Group
Note: The Monitoring subgroup parameters only apply to a Media Gateway operating in the Phone
Emulating Mode.
The Monitoring subgroup includes the following parameters:
• Monitor Call Connections
• Call Monitor Interval
• VoIP Host Monitor Interval
• Proactive DNS Monitoring
Monitor Call Connections
Description: When the Monitor Call Connections parameter is enabled, the Media Gateway will
monitor the connection state of active IP calls. If the active IP call has lost connection, the Media
Gateway will tear down the call.
Note: If enabled in SIP, the IP endpoints must support session timers.
Allowed Values:
• Yes = Media Gateway monitors the connection state of active IP calls.
• No = Media Gateway does not monitor the connection state of active IP calls.
Default Value = No
INI File Parameter Name = gwMonitorCallConns
Call Monitor Interval
Description: Specifies the call monitor interval in seconds at which active IP calls are monitored in
order to determine the connections status. This parameter is only valid if the Monitor Call
Connections parameter is enabled.
Allowed Values: 30 through 3600 seconds
Default Value = 60
INI File Parameter Name = gwMonitorCallIntSec