User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 55
Parameter Reference
Diagnostics Trace to SysLog Enabled
Description: Defines whether diagnostic trace messages are sent to SysLog server.
Allowed Values:
• Yes = Diagnostics trace messages are sent as user-level facility/debug messages.
• No = Diagnostics trace messages are not sent as user-level facility/debug messages.
Default Value = No
INI File Parameter Name = syslogTraceEnabled
3.2.3 SNMP Group
The SNMP subgroup includes the following parameters:
• SNMP Traps Enabled?
• SNMP Minimum Alarm Severity
• SNMP Trap IP List
• SNMP Community Name
• SNMP System Name
• SNMP System Contact
• SNMP System Location
SNMP Traps Enabled?
Description: Defines whether an SNMP trap is generated to signal an alarm.
Allowed Values:
• Yes = SNMP trap is generated.
• No = SNMP trap is not generated.
Default Value = No
INI File Parameter Name = snmpTrapEnabled