User`s guide

54 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.2.2 SysLog Group
The SysLog subgroup includes the following parameters:
• SysLog Server IP Address
• Alarms to SysLog Enabled
• SysLog Minimum Alarm Severity
• Diagnostics Trace to SysLog Enabled
SysLog Server IP Address
Description: IP address of the SysLog (RFC3164) server (notifications sent to server's UDP port
514).
Allowed Values: Any valid IP address in dotted decimal format
Default Value = (no default value)
INI File Parameter Name = syslogServerAddr
Note: Unit requires a restart if this parameter value is changed.
Alarms to SysLog Enabled
Description: Defines whether alarms are sent to the SysLog server.
Allowed Values:
• Yes = Alarms are sent as user-level facility messages.
• No = Alarms are sent to SysLog server.
Default Value = No
INI File Parameter Name = syslogAlarmEnabled
SysLog Minimum Alarm Severity
Description: Defines the minimum alarm severity level that generates notifications to SysLog
server.
Allowed Values:
• Error = Error alarms are sent to the SysLog server.
• Warn = Error and Warning alarms are sent to the SysLog server.
• Info = Error, Warning, and Informational alarms are sent to the SysLog server.
Default Value = Info
INI File Parameter Name = syslogAlarmSeverity