User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 47
Parameter Reference
3.1.1.3 Default Network Gateway Address
Description: Sets the IP address of the default network gateway router.
Allowed Values: Any valid IP address in dotted decimal notation.
Default Value = blank
INI File Parameter Name = ipRouterAddr
Note: Unit requires a restart if this parameter value is changed.
3.1.1.4 BOOTP Enabled
Description: When enabled, this parameter causes the Media Gateway to issue a BOOTP request
on startup. A BOOTP/TFTP server may be configured to provide IP credentials, firmware
upgrades, and a configuration INI file.
Note: Either a BOOTP/TFTP server or DHCP server may be used to respond to the Media Gateway
BOOTP request.
Allowed Values:
• Yes = Parameter enabled - Media Gateway issues a BOOTP request on startup.
• No = Parameter disabled - Media Gateway does not issue a BOOTP request on startup.
Default Value = Yes
INI File Parameter Name = ipBootpEnabled
Note: Unit requires a restart if this parameter value is changed.
3.1.1.5 SNTP Server IP Address
Description: Simple Network Time Protocol (SNTP) server IP address. Used for SIP Transport
Layer Security (TLS) data verification
Allowed Values: Any valid IP address in dotted decimal notation.
Default Value = No default value
INI File Parameter Name = ipSntpServerAddr
Note: Unit requires a restart if this parameter value is changed.