User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 43
Media Gateway Configuration
4. When the System Login Web page appears, enter the user name and current password in the
boxes provided and click on the Log On button.
Note: The user name and password are case sensitive.
5. Once the login has been accepted, the Media Gateway Summary Web page will appear. Select
the Upgrade Web page from the Configuration menu on the left side of the page.
6. Enter the path and filename of the upgrade file or click on the Browse... button to select the
upgrade file.
7. Click on the Install button to upload the file.
The Media Gateway will respond when the upgrade has completed (approximately 10-20
seconds).
8. If there is more than one upgrade file, repeat steps 5 through 7 for each additional file.
9. Select Restart from the Configuration menu on the left side of the page.
10. On the Restart Web page, click on the Restart Unit Now or Restart Unit When Idle button.
(See Section 2.5, “Restart Options”, on page 40).
11. The unit will now restart and re-initialize using the new software.