User`s guide

42 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Media Gateway Configuration
d. Click the Only CPID Parsing Rules button in the Export Files box. The File Download
dialog box then appears.
You may click the Open button to view/edit the configuration file in Notepad or click the
Save button to download and save the file to a directory. The default name for the file is
cpid.adt.
Clicking the Save button causes the Save As dialog box to appear.
e. Click the Export Routing Table Schema button in the Export Files box. The File
Download dialog box then appears.
You may click the Open button to view/edit the configuration file in Notepad or click the
Save button to download and save the file to a directory. The default name for the file is
dmg.xsd.
Clicking the Save button causes the Save As dialog box to appear.
3. To save the configuration file to a directory, click the Save button. In the Save As dialog box,
choose the directory in which you wish to save the configuration file and, if you wish, rename
the file. Do not, however, change the file type from INI.
2.6.2 Importing Configuration Information
To import a configuration file:
1. Select the Import/Export Web page from the Configuration menu.
2. Enter an INI file name in the Import box or use the Browse... button to select an INI file.
3. Click the Import Settings button to import the configuration information to the Media
Gateway.
2.7 Upgrading the Software
Software upgrades for the Media Gateway products will be made available on the Dialogic support
Web site as needed. Contact technical support to obtain software upgrade files. Upgrade files are
uploaded to the Media Gateway using the Web interface.
Caution: When a major software upgrade is performed, existing configuration information may be erased
and the default values restored. It is recommended that before upgrading the software, you should
export the current configuration information using the Export utility. Refer to Section 2.6,
“Importing and Exporting Configuration Information”, on page 40 for information about backing
up the configuration information.
When an upgrade file is made available, follow these steps to upgrade the Media Gateway:
1. Start your Web browser.
2. Download the software upgrade file from the Dialogic Support Web site.
3. In the Web browser address box, enter the IP address of the Media Gateway that you wish to
upgrade.