User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 35
Overview
• DSP Settings - Selecting DSP Settings brings up the DSP Settings Web page which allows
you to configure DSP Settings parameters. For detailed information about the DSP Settings
parameters, see Section 3.19, “DSP Settings Parameters”, on page 162.
The System Web pages provide the system administrator with an interface to change password,
upgrade system, and restart system.
• Password - Selecting Password brings up the Password Web page. This page allows you to
change your password. For information about the procedure for changing your password, see
Section 2.3, “Changing the Password”, on page 39.
• Upgrade - Selecting Upgrade brings up the Upgrade Web page. The Upgrade Web page
allows you to upgrade the Media Gateway software. For information about the procedure for
upgrading the software, see Section 2.7, “Upgrading the Software”, on page 42.
• Restart - Selecting Restart from the Configuration menu brings up the Restart Web page
which allows you to restart the Media Gateway. Restarting the unit is required when certain
parameter values are changed. You have two options to choose from when restarting the unit:
– Restart Unit Now - Clicking this button will cause the unit to restart immediately.
– Restart Unit When Idle - Clicking this button will cause the unit to restart when the unit is
considered in the idle state. In the idle state, there are no calls (incoming, outgoing, or
connected) on any of the PBX ports of the Media Gateway. By selecting this option, you
will schedule a restart time that minimizes the effect the restart will have on call traffic
through the unit.
1.6 Online Help
Context-sensitive online Help is provided for the various Web pages. When you move the mouse
pointer over a parameter name, the pointer changes from an arrow to a “?” symbol and Help
information about that parameter is displayed at the top of the page.