User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 313
Send Early 183 Progress Response
92
Serial CPID Expiration
153
Serial Interface Protocol
150
Serial Mode (Master/Slave)
150
Serial Port Baud Rate
146, 148
Serial Port Data Bits
147, 149
Serial Port Parity
147, 148
Serial Port Stop Bits
147, 149
Server Port
63, 65
Signaling Digit Relay Mode
93
Signaling Mode
109
SIPS URI Scheme
82
SNMP Community Name
56
SNMP System Contact
57
SNMP System Location
57
SNMP System Name
56
SNMP Trap IP List
56
SNMP Traps Enabled
55, 56
SNTP Server IP Address
47
Source E-Mail Address
53, 54
SRTP Preference
88
Static TDM Calling Party - E1
124
System Number
152
T.38 Packet Loss Concealment Method
175
T.38 UDPTL Redundancy Count for Fax Page Data
175
T.38 UDPTL Redundancy Count for T.30 Messages
176
T1 CAS Protocol
111
T1 Multiplier
68
T1 Time
67, 68
T2 Time
68
TCP Inactivity Timer
63, 66
TDM to IP AGC Enable
171
TDM to IP AGC Max Gain
172
TDM to IP AGC Min Gain
172
TDM to IP AGC Slew Rate
172
TDM to IP AGC Target Level
172
TDM to IP Gain Adjustment
164
TDM to TDM Media Always Clear Mode
169
Telephone-Event Payload Type
96
Telephony Port Enabled
136
Telephony Port Interface Side
110
Telnet Server Enabled
58
TLS Certificate Type
161
Tone Cadence Time
157
Tone Cadence Time Deviation
157
Tone Event
155
Tone Frequency
156
Tone Frequency Deviation
157
Tone Name
155
Transfer Feature Code
113, 127
Translation Method
77
Transmit Small T4 ECM T.38 Packets
173
Transport Protocol
82
TSI Removal
174
Turn MWI Off FAC
107
Turn MWI On FAC
107
Unauthenticated SRTP Enable
91
UnEncrypted SRTCP Enable
91
UnEncrypted SRTP Enable
91
Unhold on RE-INVITE with No SDP
97