User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 301
Diagnostics
002:59:314 [Tel-2 ] Event Lamp 60:CallApp0:0 OFF->FLASH
002:59:550 [Tel-2 ] Event 0:0:48 | 251 |
002:59:552 [Tel-2 ] Event Cpid (251->) (Direct)
003:02:300 [Tel-1 ] Event Lamp 60:CallApp0:0 FLASH->OFF
003:02:372 [Tel-2 ] Event Lamp 60:CallApp0:0 FLASH->OFF
003:02:490 [Tel-1 ] Event 0:0:48 | MAY 13 7:44 P |
003:02:570 [Tel-2 ] Event 0:0:48 | MAY 13 7:44 P
|
Example 2
Enable tracing of SIP messages:
PIMG>trace voip prot on
Ok
PIMG>exit
Good-Bye.
[Tel-1 ] Event Lamp 60:CallApp0:0 OFF->FLASH
[Tel-1 ] Event 0:0:48 | 250 |
[Tel-1 ] Event Cpid (250->) (Direct)
[VoIP ] Prot <----v=0!
[VoIP ] Prot o=phone 26533 0 IN IP4 10.0.1.110!
[VoIP ] Prot s=-!
[VoIP ] Prot c=IN IP4 10.0.1.110!
[VoIP ] Prot t=0 0!
[VoIP ] Prot m=audio 49010 RTP/AVP 0 8 101!
[VoIP ] Prot a=rtpmap:0 PCMU/8000/1!
[VoIP ] Prot a=rtpmap:8 PCMA/8000/1!
[VoIP ] Prot a=rtpmap:101 telephone-event/8000!
[VoIP ] Prot a=fmtp:101 0-15!
[VoIP ] Prot a=sendrecv!
[VoIP ] Prot
[VoIP ] Prot <----INVITE sip:101@10.0.1.215;Transport=udp SIP/2.0!
[VoIP ] Prot
From:"250"<sip:port1@10.0.1.110:5060>;user=phone;tag=1A1F32463135364100000ABE!
[VoIP ] Prot To:sip:101@10.0.1.215!
[VoIP ] Prot Content-Type:application/SDP!
[VoIP ] Prot Call-ID:[e-mail]!
[VoIP ] Prot CSeq:1 INVITE!
[VoIP ] Prot Allow-Events:refer,message-summary!
[VoIP ] Prot Expires:120!
[VoIP ] Prot Via:SIP/2.0/UDP 10.0.1.110:5060!
[VoIP ] Prot Contact:<sip:port1@10.0.1.110:5060>!
[VoIP ] Prot User-Agent:DMG1000 !
[VoIP ] Prot Max-Forwards:70!
[VoIP ] Prot Supported:100rel,timer!
[VoIP ] Prot Content-Length:216!
[VoIP ] Prot !
[VoIP ] Prot v=0!
[VoIP ] Prot o=phone 26533 0 IN IP4 10.0.1.110!
[VoIP ] Prot s=-!
[VoIP ] Prot c=IN IP4 10.0.1.110!
[VoIP ] Prot t=0 0!
[VoIP ] Prot m=audio 49010 RTP/AVP 0 8 101!
[VoIP ] Prot a=rtpmap:0 PCMU/8000/1!
[VoIP ] Prot a=rtpmap:8 PCMA/8000/1!
[VoIP ] Prot a=rtpmap:101 telephone-event/8000!
[VoIP ] Prot a=fmtp:101 0-15!
[VoIP ] Prot a=sendrecv!