User`s guide

298 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Diagnostics
9.6.3 Trace Commands
The trace commands include the following:
• trace show
• trace default
• trace <trace key> <trace type|all> <on|off>
• trace all <trace type|all> <on|off>
• trace <trace key|all> reset
• trace all off
• trace port <1-based port number|all> <on|off>
• trace time <on|off>
• trace -l
9.6.3.1 trace show
The trace show command displays the trace levels of all trace modules and port-related trace
settings. The following is an example of a trace show display:
PIMG>trace show
Key Traces
---------- ------------------------
System Error Init Debug
Cfg Error Init Debug
Tel Error Init Debug
DspIf Error Init Debug
DspRoot Error Init Debug
EthMgr Error Init Debug
Arp Error Init Debug
Web Error Init Debug
Alarm Error Init Debug
Table 20. Supported Trace Types
Trace Types Trace Description
Prot Protocol
Code Software/Code
Error Errors (1)
Warn Warnings
Init Software/Device initialization (1)
Alarm Alarms (1)
Event Hookswitch, Lamps, Tones, Displays, Button Presses
Stat Statistics
(1) System starts with these enabled on all trace keys.