User`s guide
286 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Diagnostics
• TDM Capture: The TDM log is a copy of the voice data transferred on the T1/E1 line. It is
available only on the DMG2000.
To view a log you must transfer the log to a PC. When transferred to a PC, each log is formatted
into an industry standard to facilitate viewing and sharing of data. The format for each log is:
• Trace Capture: Uses an ASCII text format (.TXT)
• Network Capture: Uses an Ethereal format. Ethereal is a freeware program downloadable
from the Internet. It is required only to view Network Captures, not to transfer them from the
Media Gateway to a PC.
• TDM Capture: Uses a Wave file format (.wav). Wave format is a standard Windows
®
format
and can be opened by programs such as Windows Media Player, Cool Edit and Adobe
Audition. None of these programs are required to transfer the file from the Gateway to a PC,
but one is required to view or playback the file.
9.4.1.1 Control of Log Files:
The control of each log file is independent (i.e. more than one log can be simultaneously created)
and is administered via the Media Gateway’s Web interface. You reach the logging pages by using
the Diagnostic Web page, shown in Figure 59.
Figure 59. Diagnostic Web Page
In summarizing the overview of Diagnostic Logging, remember:
• Logging is available on Media Gateway Version 5.0 Software and later.
• The DMG1000 provides two logs: Trace capture and Network capture.
• The DMG2000 provides three logs: Trace capture, Network capture and TDM capture.
• The Media Gateway stores the logs in RAM. Therefore, the logs are not preserved if the unit is
reset or powered down. To save a log you must transfer it to a PC.
• Special applications are not required to download logs from the Media Gateway to a PC, but
are required to view the logs.
• All control of logging is through the Web interface.
9.4.2 Trace Capture
The Trace Capture enhances the trace mechanism described in Section 9.6, “Trace Mechanism”, on
page 294. Specifically, it allows users to set the trace mask via the Web page in addition to allowing
the trace output to be redirected to a log file that can then be downloaded. The DMG2000 Trace