User`s guide

282 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Diagnostics
Figure 55. Call Flow for Send Message Waiting Status
9.3.2.3 Test Status
When a diagnostic test is executed the test results are shown in the TDM Self Verification Test
Status table on the Web page.
The test can be canceled at any time by pressing the Cancel Test button.
When the test is completed a hyperlink will be displayed to allow the user to return to the TDM
Self Verification Test configuration Web page.
Figure 56. TDM Self Verification Test Status Web Page
Test Result Symbol Description
- Test skipped because not configured or not available (no capability,
not enabled, or not in-service).
n Test was pending but did not execute because a failure occurred.
PTest Passed
F Test Failed