User`s guide

Routing Table
236 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Example #4 – Basic Call with MWI
System Configuration:
Requirements:
1. All inbound TDM requests must be routed to the media server (IP address 10.1.1.1).
2. All inbound VoIP calls must be routed out the TDM. Only TDM ports 1-6 can be used for calls.
3. All inbound VoIP MWIs (Message Waiting Indications) must be routed out the TDM. Only TDM
ports 7 and 8 can be used for MWIs.
Steps:
1. Determine the required TDM Trunk Groups and the VoIP Host Groups.
• From requirement #1 we have a TDM trunk group of “all TDM requests” and a VoIP host
group of “10.1.1.1”.
• From requirement #2 we have a TDM trunk group of “TDM ports 1 to 6”.
• From requirement #3 we have a TDM trunk group of “TDM ports 7 & 8”.
2. Set up TDM Trunk Groups.
Name Selection Direction Selection Mode Port/Channel Content
all TDM requests *
TDM ports 1 to 6 Ascending Cyclic 1-6
TDM ports 7 & 8 Ascending Cyclic 7,8
3. Set up VoIP Host Groups.
Name Load Balanced Fault Tolerant Host Summary
All to 10.1.1.1 false false 10.1.1.1