User`s guide

Routing Table
224 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
6. Validate Routing Table.
The Routing Table can be validated using the Tests -> Router web page.
• Navigate to Tests -> Router and enter data as per the following table.
Inbound Route
• Inbound TDM
o Inbound VoIP
Request Type
Call
Port
1
Channel
1
Calling Number
156
Calling Name
Bill
Called Number
213
Called Name
Mary
Redirect Number
Redirect Name
• Click on “Simulate Route”. The Test Results table (bottom of page) should be filled in as
follows:
Test Results
Results
Test Passed
Reason
Inbound Rule
All Inbound TDM
Outbound Group
All To 172.13.4.3
• The Outbound Route table should be filled in as follows:
Outbound Route
VoIP
Device
Bridged
Method
172.13.4.3
Host
0
IP Port
156
Calling Number
Bill
Calling Name
213
Called Number
Mary
Called Name
Redirect Number
Redirect Name
• Try several more Inbound Routes varying the Request Type, Port and Channel. Since all
Inbound TDM are routed using the same rule, the Outbound Route should be the same.
• Now test the Inbound VoIP.