User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 209
Routing Table
Table 13 shows the syntax used for CPID Matching.
Figure 32 is a screen shot of the CPID Matching configuration Web page:
Figure 32. CPID Matching Configuration Web Page
Calling Party Number - The formula as specified in the section above that is used to match the
calling number of the incoming call.
Calling Party Name- The formula as specified in the section above that is used to match the
calling name of the incoming call.
Called Party Number - The formula as specified in the section above that is used to match the
called number of the incoming call.
Table 13. Syntax Used for CPID Matching
Number Matching
Token Description
* Matches any number string when entered alone.
0 1 2 3 4 5 6 7 8 9 Identifies a specific digit.
[digit_string-digit_string] Specifies a range of digit strings. Identifies any digit string
that is included in the range. The range delimiters must both
contain the same number of digits. A digit string must be no
more than 9 digits in length.
[digit_string-digit_string, digit_string] Specifies a range of digit strings as a comma separated list.
The range delimiters and comma separated number strings
must all contain the same number of digits.
x Matches any single digit.
. Matches an arbitrary number of digits at the end of a dial
string.
, Creates a compound expression.
[blank] Matches a blank (or missing) entry.
Name Matching
Token Description
* Matches any number string when entered alone.
name Must match the specified name exactly.