User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 199
Routing Table
Figure 26 is a screen shot of the CPID Matching configuration Web page:
Figure 26. CPID Matching Configuration Web Page
Calling Party Number - The formula as specified in the section above that is used to match the
calling number of the incoming call.
Calling Party Name- The formula as specified in the section above that is used to match the
calling name of the incoming call.
Called Party Number - The formula as specified in the section above that is used to match the
called number of the incoming call.
Called Party Name - The formula as specified in the section above that is used to match the called
name of the incoming call.
Redirecting Party Number - The formula as specified in the section above that is used to match
the redirect number of the incoming call.
Redirecting Party Name - The formula as specified in the section above that is used to match the
redirect name of the incoming call.
Call Type Property Matching
Specifies matching of incoming ISDN Call Type characteristics. On a TDM interface using the
ISDN protocol, incoming calls may have Call Type information associated with them. Call Type
Property Matching allows calls to be matched based on this information. Call Type has three
properties and can apply to the Calling, Called, or Redirecting party. Any, all, or none of the
properties may exist in an ISDN call.