User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 181
Parameter Reference
3.20.8 Routing Proxy Group Name
Description: Specifies the routing proxy group name.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values: 0 to 39 characters
Default Value = blank
INI File Parameter Name = gwRoutingProxyGroupName
3.20.9 Routing Table Only On Proxy Down
Description: If a VoIP proxy server is available, then all inbound TDM calls and messages will be
routed to the VoIP proxy server. If all VoIP proxy servers are unreachable, then the outbound route
will be determined by the routing table. All inbound TDM calls and messages will use the routing
table to determine the outbound route.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values:
• Yes
• No
Default Value = No
INI File Parameter Name = gwRoutingTableOnlyOnProxyDown
3.20.10 Port Disable Timeout
Description: Represents the time that every port will wait before getting disabled upon restart.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values: 0 to 10000 ms
Default Value = 0
INI File Parameter Name = telPortdisableTimeout
Note: Changing this value from the default (0) will cause a delay in enabling or disabling of ports and
restarting of the gateway.