User`s guide

180 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.20.5 ISDN Overlap Receive Minimum Digits
Description: Specifies the minimum number of called-party digits that must be received on an
inbound call before the inbound call is processed. If the value is 0, then the call is processed
immediately. Applicable only when the switch is using overlap sending.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values: 0 to 64 digits
Default Value = 0
INI File Parameter Name = isdnOverlapRcvMinDigits
3.20.6 ISDN Overlap Receive Timeout
Description: Specifies the number of milliseconds before the call is answered when in overlap
receive mode.
Note: This parameter can only be changed in the configuration file. It is not accessible through the Web
interface.
Allowed Values: 0 to 65535 milliseconds
Default Value = 14000 milliseconds
INI File Parameter Name = isdnOverlapRcvToutMs
3.20.7 ISDN Service Class
Description: This parameter can be used to control the Bearer Channel Parameters.
Allowed Values:
• Speech
• 3.1_kHz Audio
• Telephony
• FAX_Group_2_and_3
Default Value = Speech
INI File Parameter Name = isdnServiceClass