User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 163
Parameter Reference
3.19.1 DSP Advanced Settings
The DSP Advanced Settings parameters include:
• TDM to IP Gain Adjustment (DMG1000 Only)
• IP to TDM Gain Adjustment (DMG1000 Only)
• Line Echo Cancellation (DMG1000 Only)
• Line Echo Cancellation NLP (DMG1000 Only)
• Voice Activity Noise Floor
• Voice Activity Measurement Period (DMG2000 Only)
• Voice Activity Signal to Noise Ratio (DMG2000 Only)
• Call Progress Filter Threshold
• Call Progress Filter Debounce
• Call Progress Filter Percent (DMG1000 Only)
• Call Progress Filter Low Cutoff (DMG1000 Only)
• Call Progress Filter High Cutoff (DMG1000 Only)
• Call Progress Filter SNR in dB (DMG2000 Only)
• Call Progress Filter Two Tones Max Twist in dB (DMG2000 Only)
• Jitter-Buffer Minimum Delay (DMG2000 Only)
• Jitter-Buffer Maximum Delay (DMG2000 Only)
• Jitter-Buffer Initial Delay (DMG2000 Only)
• Jitter-Buffer Adaptation Period (DMG2000 Only)
• Jitter-Buffer Deletion Threshold (DMG2000 Only)
• Jitter-Buffer Frame Deletion Mode (DMG2000 Only)
• TDM to TDM Media Always Clear Mode (DMG2000 Only)
• VoIP Packet Loss Concealment (DMG2000 Only)
• IP to TDM AGC Enable (DMG2000 Only)
• IP to TDM AGC Slew Rate (DMG2000 Only)
• IP to TDM AGC Target Level (DMG2000 Only)
• IP to TDM AGC Max Gain (DMG2000 Only)
• IP to TDM AGC Min Gain (DMG2000 Only)
• TDM to IP AGC Enable (DMG2000 Only)
• TDM to IP AGC Slew Rate (DMG2000 Only)
• TDM to IP AGC Target Level (DMG2000 Only)
• TDM to IP AGC Max Gain (DMG2000 Only)
• TDM to IP AGC Min Gain (DMG2000 Only)