User`s guide

162 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.18.1.2 HTTPS Certificate Type
Description: Determines whether the Media Gateway uses a self-assigned or CA signed certificate
for HTTP over TLS (HTTPS).
Allowed Values:
• Self Signed = Use the self-signed TLS certificate
• CA Signed = Use the CA-signed TLS certificate
Default Value = Self Signed
INI File Parameter Name = secSipTlsUseSelfSignedCert
Note: Unit requires a restart if this parameter value is changed.
3.19 DSP Settings Parameters
The DSP Settings parameters are included in the Configuration menu selections. These parameters
can be accessed instead by navigating to the DSP Settings link via the Web interface.
Caution: Modifying any of these parameters affects the digital signal processors and significantly changes
the operation of the Media Gateway.
Caution: The DSP Settings configuration parameters should only be modified by advanced users of the
Media Gateway. You are strongly advised to backup your current configuration before proceeding.
See Section 2.6.1, “Exporting Configuration Information”, on page 41 for additional information
about backing up your configuration.
The DSP Settings group includes the following subgroups:
• DSP Advanced Settings
• T.38 Fax Advanced Settings
• Positive Answer Machine Detection