User`s guide

16 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Revision History
64-0346-10 November 2010 Updated to support Version 6.0 SU7 Software.
Chapter 3, “Parameter Reference” added new Privacy Headers Group section with
new parameters for Enable Privacy Headers and Privacy Header Method.
Chapter 3, “Parameter Reference” added new parameter in DSP Settings
Parameters for VoIP Packet Loss Concealment (DMG2000 Only).
64-0346-09 July 2010 Updated to support Version 6.0 SU6 Software.
Chapter 3, “Parameter Reference” updated parameter description for Call as Domain
Name? in User-Agent Group.
Chapter 3, “Parameter Reference” updated parameter description for Proactive DNS
Monitoring in Monitoring Group.
Chapter 3, “Parameter Reference” added new Early Media Group section in VoIP
Media Parameters.
Chapter 3, “Parameter Reference” added new parameters in Early Media Group for
Send Early 183 Progress Response and Early Media Requires Reliable Provisional
Responses.
Chapter 3, “Parameter Reference” added new parameters in Audio Group for
Continue Ringback on CN, Packet Time for Inbound VoIP, Telephone-Event Payload
Type, and G722 Enable.
Chapter 3, “Parameter Reference” added new value RFC2833-LowLatency to Digit
Relay Mode in Audio Group.
Chapter 3, “Parameter Reference” added new parameters in Fax Group for Fax
Server Address and Fax Server Network Group.
Chapter 3, “Parameter Reference” added new TDM Cause Codes Group section to
support TDM Cause Codes feature.
Chapter 3, “Parameter Reference” added new parameter in Non-Menu (Hidden)
Parameters for DNS NAPTR and SRV Record Enable.
Chapter 5, “Routing Table” added note to VoIP Host Groups Table that the maximum
number of supported VoIP Host Groups is 120 (DMG2000 only).
64-0346-08 February 2010 Updated to support Version 6.0 SU5 Software.
Chapter 3, “Parameter Reference” updated parameter description for VoIP Host
Monitor Interval in
Monitoring Group.
Chapter 3, “Parameter Reference” added new parameter in Audio Group for
Acceptable Media.
Chapter 3, “Parameter Reference” moved parameters Unauthenticated SRTP
Enable, UnEncrypted SRTCP Enable, and UnEncrypted SRTP Enable previously
listed in Non-Menu (Hidden) Parameters to SRTP Group.
Chapter 3, “Parameter Reference” added TDM Passthrough selection to ISDN Call
Type Rules.
Chapter 3, “Parameter Reference” added new parameter in DSP Settings
Parameters for TDM to TDM Media Always Clear Mode (DMG2000 Only).
Chapter 3, “Parameter Reference” added new parameter in Non-Menu (Hidden)
Parameters for Incompatible Message STATUS.
Chapter 3, “Parameter Reference” added new parameter in Non-Menu (Hidden)
Parameters for ISDN Service Class.
Chapter 5, “Routing Table” updated screen shots and descriptions in Inbound TDM
Rules Table and Inbound VoIP Rules Table to show support for Move Selected Row
buttons: Up, Down, or To Position.
64-0346-07 November 2009 Updated to support Version 6.0 SU3.2 Software.
Document No. Publication Date Description of Revisions