User`s guide

154 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.17 Tone Detection Parameters
The Tone Detection parameters define the characteristics (frequencies, durations, and deviations)
of the tones that the Media Gateway detects during call progress analysis.
These call progress tones can be viewed and edited manually from the Web interface if the
characteristics are known, or the Media Gateway can be directed to analyze and learn the
characteristics of specific call progress tones. For more information on viewing, editing, learning,
and validating call progress tones from the Web interface, see Chapter 4, “Call Progress Tones”.
The Tone Detection parameters include the following:
• ID
• Tone Event
• Tone Name
• Cadence Type
• Number of Cadence Cycles
• Tone Frequency
• Tone Frequency Deviation
• Tone Cadence Time
• Tone Cadence Time Deviation
The Tone Generation Configuration parameters include the following:
• Call Progress Tone Generation Event
• Call Progress Tone Generation Name
• Call Progress Tone Generation Num Cadence Cycles
• Call Progress Tone Generation Frequency 1 (Hz)
• Call Progress Tone Generation Frequency 2 (Hz)
• Call Progress Tone Generation Frequency 3 (Hz)
• Call Progress Tone Generation Frequency 4 (Hz)
• Call Progress Tone Generation Amplitude 1 (dBm)
• Call Progress Tone Generation Amplitude 2 (dBm)
• Call Progress Tone Generation Amplitude 3 (dBm)
• Call Progress Tone Generation Amplitude 4 (dBm)
• Call Progress Generation Cadence On Time
• Call Progress Generation Cadence Off Time
In addition, you can edit the INI file directly if needed as discussed in the following topic:
• Editing the INI File Directly