User`s guide

152 Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide
Parameter Reference
3.16.6 CPID Padding String
Description: Specifies the pad string to strip from the CPID fields (calling and called parties) in
the incoming Serial packet data. Also used to pad extensions in MWI requests sent to the PBX
from the Media Gateway. This pad string must match the pad string configured by the PBX.
This parameter is only required when the Serial Protocol parameter is set to SMDI and the Media
Gateway is the Serial Protocol Master.
Allowed Values: A string of up to 10 digits
Default Value = (no default value)
INI File Parameter Name = telSerCpidPadStr
3.16.7 Voice Mail Port Length
Description: Specifies the length of the field in the Serial data packet that contains the “voice mail
port” number that the call arrived (or will arrive) on. This parameter is only required when the
Serial protocol is set to MD110 and the Media Gateway is the Serial Protocol Master.
Allowed Values: 2 to 5
Default Value = 2
INI File Parameter Name = telSerVmpLen
3.16.8 System Number
Description: Specifies the “voice mail system” that the Serial protocol packet is being generated
from. This parameter is used by the PBX in the event there is more than one application server (e.g.
voice mail, unified messaging server, etc.) connected to the PBX. This parameter is only required
when the Serial protocol parameter is set to a value of MD110 and this Media Gateway is
configured as the Serial Protocol Master.
Allowed Values: 0 to 99
Default Value = 1
INI File Parameter Name = telSerSysNum