User`s guide

Dialogic
®
1000 and 2000 Media Gateway Series User’s Guide 149
Parameter Reference
Serial Port Data Bits
Description: Specifies the number of data bits used by the DMG2000 Serial port.
Allowed Values:
• 7 data bits
• 8 data bits
Default Value = 8 data bits
INI File Parameter Name = sysSerialDataBitsCom2
Serial Port Stop Bits
Description: Specifies the number of stop bits used by the DMG2000 Serial port.
Allowed Values:
• 1 stop bit
• 2 stop bits
Default Value = 1 stop bit
INI File Parameter Name = sysSerialStopBitsCom2
3.16 Serial Ports Switch Protocol Parameters
Note: The Switch Protocol Web page does not exist for Mitel or Rolm DMG1000 units.
The Serial Protocol parameters are used to define the Serial protocol used in the connection to the
PBX Serial link. These parameters include:
• Serial Mode (Master/Slave)
• Serial Interface Protocol
• MCI Message Extension Length
• MCI Message Type
• CPID Length
• CPID Padding String
• Voice Mail Port Length
• System Number
• MWI Response Timeout
• IP Address of Serial Server
• Serial CPID Expiration